Frequently Asked Questions
The AquaSense 2 Ultra pool robot is equipped with a 13,400 mAh battery that fully recharges in 4.5 hours via a high-performance wireless charging station.
Depending on the mode selected, the AquaSense 2 Ultra pool robot offers up to 10 hours for cleaning the surface, 5 hours for the bottom and 4.5 hours for cleaning the walls and waterline.
Designed to operate at depths of between 40 cm and 3 metres, the robot can also clean steps if their width and the depth of the water (minimum 30 cm) allow it.
It is capable of effectively cleaning a pool of up to 320 m² in a full cycle. For larger pools, several cycles will be necessary.
The robot is suitable for both in-ground and above-ground pools and works perfectly with a variety of surfaces such as concrete, liner, fibreglass, tiles or stainless steel.
Yes, it can be used in saltwater pools, provided that the salt concentration remains below 5,000 ppm, in accordance with residential standards.
Equipped with a dual filtration system (150 μm and 250 μm), it captures leaves, hair, sand, insects and other impurities for crystal-clear water at all times.
The robot automatically returns to the edge at the end of a cycle or when the battery is low, making it easy to retrieve and recharge via its dedicated station.
Thanks to a 5-in-1 system, it treats the surface by effectively eliminating floating debris for a complete and even clean.
The technology binds fine particles and improves filtration, thus reducing the use of chemicals for exceptionally clear water.
Yes, equipped with HybridSense™ navigation, it detects obstacles and adjusts its route to effectively clean the areas around ladders, steps or stairs.
Designed with high-end materials and an automotive-grade coating, it effectively resists UV rays for extended durability.
It has Wi-Fi 2.4G/5G and Bluetooth connectivity, facilitating programming and management via a dedicated mobile application.
It recharges quickly when placed on a vertical wireless station, allowing it to be back in service in just 4.5 hours.
It offers several programmes, including a complete mode for the bottom, walls and waterline, as well as an ECO mode for extended operation during your absences.
Thanks to its 5-in-1 system, it cleans simultaneously, guaranteeing a spotlessly clean pool.
It stands out for its long battery life, its ability to clean large surfaces, its advanced connectivity and its high-performance filtration system.
Yes, it is particularly effective at vacuuming up algae in suspension. For stubborn algae, pre-treatment may be recommended.
ECO mode allows the robot to clean during your absence, but it must be removed periodically for maintenance and recharging.
All spare parts are available on BeatEuro.com.
The official accessories can be found on BeatEuro.com, ensuring total compatibility.
The clarifying cartridges, essential for pure water, can be purchased here on BeatEuro.com.
Purchase, with a 3-year warranty, is possible on BeatEuro.com.
Yes, it works perfectly with mirror pools for even cleaning coverage.
It has been designed to adapt to the unique environments of Californian swimming pools and beaches, guaranteeing optimal efficiency.
The AquaSense 2 Pro pool robot has a 13,400 mAh battery that fully recharges in about 4.5 hours. In cold weather (below 25°C), the recharging time may be a little longer.
Equipped with a double filter (150 μm and 250 μm), it effectively captures particles as fine as 150 micrometres, trapping leaves, hair, sand and insects.
It effectively removes leaves, hair, sand, insects and other impurities thanks to its advanced filtration system.
Yes, it can suck up algae in suspension. For heavily encrusted algae, it is recommended to apply an anti-algae treatment before the cycle.
Designed for swimming pools with a depth of between 0.5 and 3 metres, it can also clean shallow areas up to 40 cm deep.
Yes, it can clean the stairs if they are wide enough and if the water depth exceeds 40 cm. Software improvements are in progress.
In most configurations, it maps the pool to adapt its route, although complex shapes can impact accuracy.
Yes, it can be controlled remotely via the mobile app, although this function is only available when the device is on the surface.
Yes, via the mobile app, it is possible to instruct this robot to automatically return to the edge during its cycle.
Made with UV-resistant materials, it ensures optimal durability even in case of prolonged exposure.
It can effectively clean pools up to 360 m² in one cleaning cycle.
Yes, provided that the steps are wide and the water depth is greater than 40 cm.
It has dual Wi-Fi connectivity (2.4 GHz and 5 GHz) as well as Bluetooth for optimal remote management.
It is recharged via a wireless vertical charging station, ensuring simple recharging without cables.
Yes, it works perfectly in saltwater pools without affecting its performance.
Yes, thanks to its surface cleaning functions, it acts like a mobile skimmer by effectively eliminating floating debris.
It offers various modes, including a complete mode for the bottom, walls and waterline, as well as an ECO mode for extended operation during your absences.
Thanks to an integrated 5-in-1 system, it cleans the bottom, walls and waterline in a single pass for uniform cleanliness.
It stands out for its long battery life, extensive cleaning capacity, compatibility with various environments and its high-performance filtration system.
ECO mode allows for a prolonged presence during your absences, but regular maintenance and recharging is essential.
All spare parts are available on BeatEuro.com.
The official accessories can be found on BeatEuro.com, guaranteeing perfect compatibility.
The clarifying cartridges, which improve the quality of the water, can be purchased here on BeatEuro.com.
Purchase, with a 3-year warranty, is possible on BeatEuro.com.
Yes, it works perfectly with mirror pools, guaranteeing an even distribution of cleaning.
It has been designed to adapt to the specific features of Californian pools and beaches, offering optimal performance.
ECO mode extends the battery life by reducing energy consumption, allowing for extended cleaning during absences while ensuring regular maintenance.
Thanks to an innovative clarifying agent, it reduces the use of chemicals and promotes the coagulation of fine particles for crystal-clear water.
With an extended battery life of 4 hours, the AquaSense 2 pool robot effectively cleans surfaces of up to 300 m².
Yes, equipped with advanced sensors, it can identify and avoid obstacles, such as steps, stairs or ladders, provided that the dimensions comply with the minimum standards.
The AquaSense 2 pool robot is designed to work on various surfaces: liner, reinforced PVC, tiles, painted concrete or polyester shell.
It automatically returns to its wireless vertical station where, thanks to the SmartDrain™ system, it recharges while draining the accumulated water.
Compatible with Wi-Fi (2.4G/5G) and Bluetooth, it allows complete control via the Beatbot mobile application.
The AquaSense 2 Beatbot pool robot is covered by a 3-year warranty, including full replacement in case of proven failure.
With a 10,000 mAh battery, the AquaSense 2 pool robot takes approximately 3.5 hours to fully charge, although this time may increase slightly in cold weather.
Yes, the AquaSense 2 Beatbot pool robot works in saltwater pools provided that the salt content does not exceed 5000 PPM.
The AquaSense 2 Beatbot pool robot effectively treats the walls and waterline of infinity pools, even if it does not vacuum up surface debris.
The AquaSense 2 pool robot has a filter with a precision of 150 μm, capturing both small particles and larger debris.
The integrated cleaning system of the AquaSense 2 Beatbot pool robot effectively removes leaves, hair, sand, insects and other impurities.
Designed for swimming pools, the AquaSense 2 pool robot operates in a depth range of 0.5 to 3 metres for optimal cleaning.
The mobile app can be used to change the cleaning modes of the AquaSense 2 Beatbot pool robot. It is possible to ask this robot to return automatically to the edge during its cycle.
Thanks to its intelligent detection system, the AquaSense 2 pool robot automatically identifies and bypasses any obstacles, thus ensuring even coverage of the pool.
It is designed to clean up to 210 square metres, adapting to both private pools and large residential pools thanks to its intelligent navigation.
Yes, it incorporates sophisticated sensors and CleverNav™ technology that enable it to easily detect and bypass obstacles, steps and stairs.
Absolutely, it combines an effective surface cleaning function that complements the skimmer's work by collecting floating debris.
Yes, at the end of its cycle or when the battery is low, it rises to the surface and positions itself near the edge of the pool to facilitate its recovery and recharging.
With a 10,400 mAh battery, it takes around 3.5 hours to fully recharge via its wireless charging station, which takes slightly longer in temperatures below 25°C.
It offers up to 9.5 hours of surface cleaning or 5 hours for the bottom, guaranteeing optimal performance with each cycle.
After each use, it is placed on its wireless charging station for quick and easy recharging, without cumbersome cables.
Yes, it can be used safely in saltwater pools, provided that the salt concentration does not exceed 5,000 ppm.
It is compatible with various types of swimming pools (in-ground, above-ground) and adapts to different surfaces such as tiles, vinyl, fibreglass, etc.
Yes, it can be used in a beach footbath when the water depth is between 49 cm and 2.75 m.
It is equipped with a 3.7-litre filter basket that effectively retains impurities for consistently clear water.
Its Wi-Fi operates at 2.4 GHz and water absorbs these waves, temporarily interrupting the connection when immersed.
Connectivity is optimised for 2.4 GHz networks, but dual-band routers work. In the case of an exclusively 5 GHz network, contact your provider to activate 2.4 GHz.
It offers various programmes: a standard mode for the bottom and walls, a fast mode dedicated to the bottom, and an ECO mode that allows you to let the robot clean during your absence.
It has a 5-in-1 system that simultaneously cleans the bottom, walls and waterline for complete debris removal.
It stands out for its efficiency, intelligent navigation, compatibility with various types of pools and ease of use thanks to wireless charging and the Beatbot mobile app.
Yes, it is capable of sucking up algae in suspension. For heavily encrusted algae, pre-treatment is recommended.
ECO mode allows the robot to clean during your absence, but it must be removed periodically for maintenance and recharging.
All spare parts are available on BeatEuro.com.
The official accessories guaranteeing total compatibility can be purchased here on BeatEuro.com.
The clarifying cartridges, which improve the quality of the water, are on sale here on BeatEuro.com.
The purchase, with a 3-year warranty, is possible on BeatEuro.com.
Yes, it works perfectly with mirror pools, ensuring uniform cleaning coverage.
It has been designed to adapt to the specific features of Californian-style pools and beaches, offering effective cleaning in these environments.
ECO mode extends battery life by reducing energy consumption, allowing for extended cleaning during absences while ensuring regular maintenance.
Thanks to an innovative clarifying agent, it reduces the use of chemicals and promotes the coagulation of fine particles for crystal-clear water.
The AquaSense pool robot is designed to work in saltwater pools, provided that the salt concentration does not exceed 5,000 ppm.
No, it does not incorporate ClearWater™ technology. To benefit from this feature, it is recommended that you opt for the AquaSense Pro.
It can clean an area of up to 210 m², ideal for standard-sized pools or larger pools.
Yes, thanks to its intelligent sensors, it automatically detects and bypasses obstacles such as ladders, steps or submerged stairs.
It adapts to various pool configurations (indoor, outdoor, in-ground or above-ground) and is suitable for surfaces such as tiles, vinyl, fibreglass, etc.
Yes, it is designed to work with both in-ground and above-ground pools.
According to laboratory tests, it operates for approximately 3.5 hours in rapid mode (cleaning the bottom) and 2.5 hours in standard mode (bottom and walls).
It is equipped with a 2-litre filter basket, allowing for the efficient collection of debris.
It recharges automatically via its wireless station. Simply place it on its base for simple and efficient recharging.
Yes, at the end of its cycle or when the battery is low, it rises to the surface and positions itself near the edge of the pool for easy removal.
It has several programmes, including a fast mode for the bottom and a standard mode for a complete cleaning of the pool.
It offers different modes adapted to your needs, providing targeted cleaning of the bottom, walls and waterline.
It uses an integrated cleaning system that ensures complete coverage of the bottom, walls and waterline for consistent cleanliness.
It stands out for its ease of use, its effectiveness on standard surfaces and its compatibility with various types of pools.
Although it is robust, it is not advisable to leave it in the pool permanently. It must be removed regularly for maintenance and recharging.
Spare parts for the AquaSense Beatbot are available exclusively from BeatEuro.com.
The official accessories can be found on BeatEuro.com.
Clarifying cartridges for your Beatbot AquaSense are available here on BeatEuro.com.
The AquaSense pool robot with a 3-year warranty can be purchased at BeatEuro.com.
Yes, it also works on mirror pools for even cleaning coverage.
It is compatible with the specific features of Californian pools and beaches, offering a suitable cleaning performance.
The device's Wi-Fi connection currently only supports 2.4 GHz networks. However, dual-band (2.4 GHz and 5 GHz) Wi-Fi routers are compatible. If your home network is only configured in 5 GHz, contact your Internet service provider to activate 2.4 GHz.
The iSkim Ultra Beatbot is compatible with different pool shapes and materials, whether in-ground or above-ground. It can be used on tiled, concrete, vinyl, fibreglass and stainless steel surfaces.
Yes, the iSkim Ultra is designed for use in saltwater pools. It is made of corrosion-resistant materials and can operate without problems in water containing up to 5000 ppm of salt and a chlorine concentration not exceeding 4 ppm.
Yes, the iSkim Ultra works perfectly with infinity pools.
The iSkim Ultra filtration system is designed to capture hair, leaves, branches, flowers, grass, seeds, pollen, insects and other small debris. It filters particles up to 380 micrometres (μm).
The iSkim Ultra is equipped with a wireless induction charger. A full charge takes about 5 hours. It also has a built-in solar panel for convenient recharging using solar energy.
The iSkim Ultra is compatible with a voltage range of between 100 V and 240 V.
The iSkim Ultra's filter basket has a capacity of 9 litres.
Yes, thanks to the mobile app, you can control the iSkim Ultra and make it move forwards, backwards, turn left or right according to your needs.
The Clearwater clarifying treatment improves water quality by eliminating impurities and increasing transparency, for a cleaner and healthier pool.
The iSkim Ultra has a built-in solar panel that converts the sun's energy to top up the battery, optimising the device's battery life.
The iSkim Ultra is specially designed to clean the waterline, effectively removing residue and preventing the formation of deposits to maintain a flawless appearance.
Yes, iSkim Ultra is made with UV-resistant materials, guaranteeing durability and optimal performance even under prolonged exposure to the sun.
The Beatbot app allows you to programme, control and monitor the device in real time, offering an intuitive interface to optimise the maintenance and performance of your pool.
Yes, the iSkim Ultra, a high-tech skimmer robot, is equipped with an advanced cleaning system to effectively eliminate algae, thus ensuring clean and healthy water.
The iSkim Ultra surface cleaner can be left in the pool, but it is important to service it regularly to maintain optimal performance.
Spare parts for the iSkim Ultra are available from BeatEuro.com, making it easy to maintain your robotic pool cleaner.
Official accessories for the iSkim Ultra, the state-of-the-art surface cleaner, can be found here on BeatEuro.com.
Clarifying cartridges for iSkim Ultra are available here on BeatEuro.com, guaranteeing optimal water quality for your robot skimmer.
Manage your cookies settings on BeatEuro.com Our site BeatEuro.com uses cookies or similar technologies to provide you with services and offers tailored to your interests, to guarantee you a better user experience and to compile visit statistics.